path: root/abc80.qpf
Commit message (Expand)AuthorAgeFilesLines
* Add an I2C master engine to initialize the sound DACH. Peter Anvin2008-12-271-29/+23
* Initial port to DE1 cardhpa2008-12-201-29/+29
* Minor cleanups; allow LEDs to be overridden; CAS output on prototypeabc80-16H. Peter Anvin2005-02-021-1/+1
* Debounce for 4 msH. Peter Anvin2005-01-311-1/+1
* Fix merging bugH. Peter Anvin2005-01-311-1/+1
* Patch in sound generator logic.H. Peter Anvin2005-01-311-1/+1
* Fix the handling of attributes with DBLE. We really need twoH. Peter Anvin2004-10-021-1/+1
* Make the printer interface more ABC-likeabc80-15H. Peter Anvin2004-10-011-1/+1
* Support double height textCVS: ----------------------------------------------...H. Peter Anvin2004-10-011-1/+1
* Use enet chip address latching to reduce contention on the FSE address bus; itH. Peter Anvin2004-10-011-1/+1
* Synchronously latch the Ethernet input to keep enet_oe from going highabc80-14H. Peter Anvin2004-09-291-1/+1
* Reduce logic requirements slightly by using a 16-bit interfaceH. Peter Anvin2004-09-291-1/+1
* Allow access to the Ethernet chip; remove some old cruftH. Peter Anvin2004-09-291-1/+1
* Update for release 13: fix ',' -> 'D'abc80-13H. Peter Anvin2004-09-251-1/+1
* Use Write and Verify to the CF card.abc80-12H. Peter Anvin2004-09-221-1/+1
* Add cf_power pin, and tie it to VCCH. Peter Anvin2004-09-211-1/+1
* abc80.qsf seems to be an important file, tooabc80-10H. Peter Anvin2004-09-171-1/+1
* Run at 3, 6, 12 or 25 MHzH. Peter Anvin2004-09-171-1/+1
* - Remove some old compatibility crap;H. Peter Anvin2004-09-171-1/+1
* Quartus revision updateH. Peter Anvin2004-09-161-1/+1
* Support using serial port B as a somewhat lame printer port.H. Peter Anvin2004-09-091-1/+1
* - Go back to 25 MHzabc80-8H. Peter Anvin2004-09-081-1/+1
* Cleaner cfdisk state machine; 1's hot and more "hardware pure"H. Peter Anvin2004-09-081-1/+1
* Update design so CompactFlash actually works; make compatible withH. Peter Anvin2004-09-071-0/+29